Open Research Support by Practice

This page introduces seven key open research practices that we offer support for at Reading. Click on the drop down titles below for more information.

Who is this relevant to?

Pre-registration is most relevant to hypothesis-testing research.  However, it is potentially helpful for any research that involves researcher degrees of freedom. 

What is it all about, and why should you do it?

Pre-registration is the act of recording your protocols and hypotheses prior to conducting your research. In doing so, the researcher protects themselves against unintentional HARKing, P-Hacking and confirmation bias.  Watch this 9 minute intro to pre-registrations and registered reports, for more information.

How do I do it? (How-to resources)

What support does Reading offer?

We can offer tailored training for groups of researchers. Contact Reading’s open research co-ordinator (E.gowie@reading.ac.uk) to arrange training for your group.

Want more in-depth information?

This paper is a good, in depth introduction to the goals of and common obstacles to pre-registration. 

A four-page intro to pre-registration and registered reports. 

Contact for more info: e.gowie@reading.ac.uk, or a.tsakalaki@reading.ac.uk 

Add resources: Philosophy pre-registration case study 

 

Registered Reports 

Who is this relevant to? In theory, everyone who does hypothesis testing research – but it depends on whether your target journal offers the format. You can check in this list of 300+ participating journals. 

What is it all about, and why should you do it? A/V – 9 minute intro to pre-registrations and registered reports, including the difference between them. 

W – A registered report is a publishing format that builds on the principle of pre-registration (see above). In this model, an author submits their protocol to a journal prior to data collection. The protocol is peer-reviewed, and if judged high-quality, given an in-principal acceptance. This means that the journal commits to publishing the final article regardless of results; provided the author follows the approved protocol. 

How to: This guidance covers what to cover in stages 1 and 2 of a registered report, and provides a cover letter template 

Training: Pre-reg training 

In depth information: The Centre for Open Science provides in depth guidance. 

This webinar answers FAQs about registered reports. It is divided into chapters so that you can choose the interesting questions to listen to. 

A four-page intro to pre-registration and registered reports. 

Contact for more info:  

Add resources: 10 questions to answer to write a Stage one Reg report, and 10 tips to avoid desk rejection 

 

 

 

 

Learning to code your stats analysis 

Who is this relevant to? Anyone using statistical analysis. 

What is it all about, and why should you do it? A/V –  

W – For conclusions to be verifiable, analysis must be transparent enough to be reproduced. Unlike point-and-click statistical programmes like SPSS, statistical coding leaves a clear line of the decisions made at every point of the process. Additionally, coding a statistical analysis yourself ensures that you fully understand exactly what is happening to the data, and therefore what your results actually mean. 

How to:  

Training: Ask Anthony Haffey if he is ok to have his module here? 

Link to RSE hub 

In depth information: Extensive information can be found via Reading’s Research Software Engineering hub. 

Contact for more info: rse@reading.ac.uk 

Add resources: PCLS coding club seeks to help Psychology and related students and academics learn techniques in Python and R with an emphasis on statistical modelling and data processing. PCLS COP hold regular weekly webinar events throughout Autumn and Spring Terms. Join the MS Teams group for updates. 

CodeRefinery is an online community which provides free ‘bring your own code’ workshops among other online events. 

If you identify as LGBTQ+, RainbowR is a community of LGBTQ+ R users. It is a little bit more social focused, but it offers a buddy system for 1-to-1 R based conversations. 

Who is this relevant to? Anyone using statistical analysis. 

What is it all about, and why should you do it? A/V –  

W – For conclusions to be verifiable, analysis must be transparent enough to be reproduced. Unlike point-and-click statistical programmes like SPSS, statistical coding leaves a clear line of the decisions made at every point of the process. Additionally, coding a statistical analysis yourself ensures that you fully understand exactly what is happening to the data, and therefore what your results actually mean. 

Who is this relevant to? Everyone! Data sharing in support of published research findings (including PhD theses) is an expectation of the University’s Research Data Management Policy. It is also expected by many funders and publishers of research. 

What is it all about, and why should you do it? A/V –  

W – In order for research to be accessible and (in the case of sciences) self-correcting, data must be available for scrutiny and conform to the FAIR Principles – they must be Findable, Accessible, Interoperable, and Re-usable This can be done by using a data repository, which will preserve the data, assign a DOI and ensure continuous accessibility. Data should be made openly available wherever possible, but where not suitable for open sharing, they can be held in a controlled-access repository, which will provide access under managed conditions to authenticated researchers. 

How to:  The Research Data Service provides guidance on data preservation and sharing, and can help you identify a suitable repository for your data. It also manages the University’s data repository, the Research Data Archive, and provides guidance and support for researchers wishing to deposit their data with the University.  

Training: The Research Data Service provides core research data management training for both staff and research students in face-to-face, online and e-learning modes, and can deliver training and information sessions tailored to the requirements of any group. Visit support and training.  

In depth information: Visit the research data management guide. 

The Research data handbook provides an introduction to research data management concepts and practices, with sections on data management planning, managing your data, and preserving and sharing data. It includes guidance on handling intellectual property rights in data, and managing participant data in compliance with legal and ethical obligations.  

Contact for more info: Email the research data management team on researchdata@reading.ac.uk or book an appointment here.   

Add resources:  

Grant applications: Funders may ask for a data management plan (DMP) to be submitted in support of grant applications. Where this is the case, the plan must be reviewed by the Research Data Manager prior to submission. The Research Data Manager can advise on drafting the plan and help you specify and cost any requirements for high-volume storage and computing resource. Visit grant applications.  

Ethical review: The University Re Calibri (Body) search Ethics Committee and selected School Research Ethics Committees require the submission of a DMP with applications for ethical approval. The Research Data Service hosts the DMP template that is used for this purpose, along with supporting guidance for applicants and reviewers. Visit research ethics.  

Postgraduate research students: PGRs registered from September 2025 are required to complete data management planning training and to submit a DMP approved by their supervisor as part of confirmation of registration and subsequent annual reviews. They must also deposit primary data supporting their thesis and any published findings in a suitable data repository. Supervisors are expected to ensure their students comply with these requirements. Visit PGR data management.  

Managing participant data: We manage UoR REDCap, a secure research database platform that is widely used for collecting and managing data from research participants.  

Who is this relevant to? Anyone who uses code for their research.  

What is it all about, and why should you do it? A/V – In this video, researchers discuss their experience of open code, and why it helps them (8 mins) 

 

W – The Research Data Service provides guidance on sharing software and code. 

How to: The Research Data Service provides an in depth guide to publishing your research software, including a practical checklist. 

A three-page intro to open code and software, with a comparison of common publication platforms. 

This paper offers a step-by-step guide to creating open, reproducible code in R. 

This paper provides guidance on how to cite code in your manuscript. 

In depth information:  

Contact for more info: Email the research data management team on researchdata@reading.ac.uk or book an appointment here. 

Add resources: The Software Sustainability Institute provides community, consultancy, policy and training services to researchers who build and use software 

Creative Commons licences are recommended to ensure that other people can use and adapt your code, but that you still get credit when they do.  

 

Who is this relevant to? Everyone!  

What is it all about, and why should you do it? A/V – A 3-minute intro 

W – Pre-prints are suitable for all disciplines and methodologies. They are a great way to get credit for your work early on, including citing in grant applications and preventing scooping. They also increase the attention and citations your work gets overall.  

How to: This is a thorough, written guide on the pre-print process, start to finish.  

Sherpa-Romeo has a tool for searching journal pre-print policies. Sherpa services is now called Jisc’s Open Policy Finder https://openpolicyfinder.jisc.ac.uk  

 

In depth information: A three-page, introductory overview of pre-prints, including a list of pre-print servers by discipline. 

Libguide on preprints, with a 40 min intro video 

A one hour 15 minute podcast on the pros and cons of preprints, who they are suitable for and a brief history. 

Contact for more info: Karen Rowlett, Research Publications Advisor, k.a.rowlett@reading.ac.uk 

Add resources: 

ASAPbio includes basic resources like FAQs and infographics, and longer readings and courses. It is focused on the life-sciences, but many resources are transferable. 

What to do if you’re asked to remove a citation to a pre-print. 

 

Who is this relevant to? Everyone. As soon as accepted for publication, staff and students are required to deposit the author-final version of all journal articles and conference proceedings in CentAUR as a minimum. Books and other monographs can also be made open access. 

What is it all about, and why should you do it? Audio/Visual – OA explained in 8 minutes.  

Written – By making their publications Open Access, researchers increase the visibility of their research to readers worldwide and ensure that it is discoverable and accessible free of charge to anyone via the internet.   

In depth information: The UoR research engagement team have put together two Open Access Libguides, one for journal articles, and one for books. 

How to: The RET provides a 6 minute video on how to deposit in CentAUR. 

Contact for more info: oarequests@reading.ac.uk 

Add resources: Use the Directory for Open Access Journals (DOAJ) to find reputable open access journals. 

Use the Directory of Open Access Books (DOAB) to find reputable open access publishers and to see who is publishing open access in your field. 

‘Think. Check. Submit.’ is a well-regarded checklist that helps researchers identify trusted journals and publishers. Through a range of tools and practical resources, this international cross-sector initiative aims to educate researchers, promote integrity, and build trust in credible research and publications. There is a version for journal articles, and a version for books. 

Use the Online library of OA books (OAPEN) to find open access books in your field. 

 NB CentAUR is being rebranded in October 2025, so the deposit video will be replaced. Eventually (2026) deposit into CentAUR will be via Pure and the video will be replaced again.